|
Temperature / Humidity
It is
recommended to use the product at room temperature and humidity in
order to maintain it's optimum performance. |
| 1. Product
lifetime can be shortened when it is used under conditions of high
temperature and humidity. |
 |
 |
2. When it is
used at low temperature of 10°C or lower, response time and
brightness are affected in such a way that the proper display may
not be obtained. |
| 3. When
exposed to drastic fluctuation of temperature (hot to cold or cold
to hot), the product may be affected; specifically, drastic
temperature fluctuation from cold to hot, produces dew on the
surface which may affect the operation of the polarizer and product.
|
 |
|
Environmental Consideration
It
is recommended to use the product in a clean place and to exercise
caution to ensure it is not affected by dust or liquids, etc. |
| 1. If used in
dusty place, dust may cause an electrical short inside the product
resulting in malfunction |
 |
 |
2. If the
product is contaminated by humid or liquid substance, polarizer may
be discolored. If the liquid enters may enter the product to cause
electrical failure or corrosion which, in turn, may lead to
malfunction |
|
Handing
As
LCD is a product made of glass, caution must be exercised in using
it. It is recommended to handle it with care since shock, vibration,
and careless handling may seriously affect the product. |
| 1. The LCD
surface is made of a soft film that is vulnerable to scratch and
thus to damage by a sharp article. |
 |
 |
2. Since the
LCD is made of glass, it may be damaged if it is bent. If it falls
from a high place or receives a strong shock, the glass may be
broken. |
| 3. The LCD
product is composed of sensitive electronic parts and components.
Therefore it must be grounded by ESD protection equipment (wrist
band, etc.) before it is directly handled. |
 |
 |
4. It is
recommended that the product be handled with soft gloves during
Assembly, etc. The LCD surface is made of soft film, vulnerable to
scratches and thus to damage by a sharp articles. |
| 5. Do not
bend or stretch the back light wire. |
 |
 |
6. It is
recommended that the product surface be cleaned it is dirty by using
IPA (Isoprophyl Alcohol) or Hexane. Keytone type material (Acetone),
Ethyl or Methyl chloride must not be used as they can cause damage
to the Polarizer. |
| 7. The Driver
IC of the TFT LCD for a Notebook PC is exposed on the back of the
screen. If mechanical stress is applied to this area, it can cause
failure. Do not hold or press this part with your hands.
|
 |
|
Usage
As
LCD is a sensitive electronic equipment, it is urged to comply with
following precautions. |
| 1. Never
disassemble LCD product under any circumstances. If unqualified
operators or users assemble the product after disassembling it, it
may not function or its operation may be seriously affected.
|
 |
 |
2 . When it
is not in use, the screen must be turned off or the pattern must be
frequently changed by a screen saver. If it displays the same
pattern for a long period of time, brightness down/image sticking
may develop due to the LCD structure. |
| 3. It is
recommended that the product be stored in a cool and dry place in
its original product box. |
 |
 |
4. Please
dispose of the product according to the relevant laws and
regulations. A small quantity of mercury is contained in lamp inside
LCD product. |
