RUNCO PROJECTOR LAMPS

 

  Home > Projector Lamps > Runco Lamps

 

We received a lot of emails every day from our customers asking for Runco Lamps. Runco doesn't allow to independent distributors sell their lamps. We don't carry original Runco Lamps. If you need a replacement lamp our suggestion is contact Runco directly, always try to buy originals replacement first. If they don't have the lamp come back to us and we will resolve your problem. What we do ?  If the original lamp is hard to get or not available we start a research to locate a compatible bulb between the nearly 1000 types of lamps we have in stock or in some cases we can order directly to the bulb manufacturer.

 

Frequently Asked Questions:

 

What I need to do ?

In all cases you need send the old lamp assembly to us. we will re-use the old cage and replaced the bulb with a new compatible one and return it to you.

How much will cost it ?

We can't answer that question until we get your old lamp in ours hands. but average cost run between $250 to $550 it depend of the cost of the replacement compatible bulb, and as general rule It will cost to you the price of the compatible bulb plus $50 fee to cover our research time.

What about the life of a compatible lamp ?

In most cases the life is the same as the original, in other cases is better than the original because in some cases we use a new generation compatible lamp.

What about the warranty ?

We offer a 90 day warranty in all Lamps.

How long will it take to receive my lamp ?

It depend of the availability of the compatible lamp, if we have it in stock you can expect a return in the same day, if we need to order it, the delay time can be up to 10 days.

Can you tell me what lamp is compatible with my projector ?

No, until now, we don't have a exact cross-reference with Runco Lamps, you need to send the old lamp to us to check specifications, bulb manufacturer, type and physical size to finally locate a compatible one.

Where I need to send my old lamp ?

Send your lamp to the address below and print our Lamp Research Form

               

                Express Repair Center

                7839 NW 15 STREET

                Miami Fl 33126

 

 

Projector Model

Lamp Type

Lamp Power

Average Life

Runco DLC-2000HD Projector

Metal Halide

250W

1500 hours

Runco DLP-100 Projector

Metal Halide 270W 1000 hours

Runco LCP-500 Projector

This projector was manufactured by NEC as the MultiSync MT600

Metal Halide 250W 1000 hours

Runco LCP-550 Projector

Metal Halide 250W 1000 hours

Runco Reflection CL-500 Projector

P-VIP 150W 1500 hours

Runco Reflection CL-700 Projector

Metal Halide 210W 1000 hours

Runco Reflection DR-300 Projector

NSH 135W 1000 hours

Runco Reflection DR-300c Projector

NSH 135W 1000 hours

Runco Reflection VX-1000c Projector

NSH 250W 2000 hours

Runco Reflection VX-1000ci Projector

NSH 250W 2000 hours

Runco Reflection VX-4000ci Projector

NSH 250W 2000 hours

Runco Reflection VX-5000ci Projector

NSH 250W 2000 hours

Runco Reflection VX-3c Projector

Xenon 700W 2000 hours

Runco Reflection VX-5c Projector

Xenon 700W 2000 hours

Runco VX-101c Projector

UHP 150W 2000 hours

Runco VX-1c Projector

P-VIP 150W 1500 hours

Runco VX-5000C Projector

NSH 250W 2000 hours

Runco VX3- DLP Projector

Xenon 500W 1000 hours

 

Lamps are items not returnable, if your projector doesn't turn on and you are not sure if the problem is the Lamp, please send your projector to us for evaluation, if the problem is the lamp we will replaced it at no extra charge and plus we will give 90 days warranty on the lamp. If the problem is not the lamp you will received an estimate of the repair work with the exact part your projector needs

For Ship in Service Click Here

Need a Projector Repair and Maintenance ? Check Here

 

...Did you know

The effective cooling of your projector is crucial for trouble free operation and a long projector life. Dust filters need to be cleaned regularly to ensure that the projector is properly ventilated and does not overheat. This is vital to the life of both projector and lamp.

 

Always read the User Manual of your unit for detailed Instructions about the maintenance.
The interval required between each cleaning of the dust filter is dependent on the projector usage, as well as the operating environment. Naturally, extended use or a dusty environment will necessitate more frequent cleaning. The rule of thumb is about once every 3 months but at least every 200 operating hours. Problems resulting from allowing the filters to become clogged can include one or more of the following temporary or permanent problems:


• Poor image quality and/or uniformity.

• A "Hotspot" in the middle of a projected image caused by an overheated LCD module.

• Lamp fusing or shortened lamp life.

• A burning smell caused by the optical engine melt down.

• A temporary or permanent projector shutdown caused by an overheated temperature safety switch or a repeatedly over-heated power supply.

Your Digital projector is an expensive asset
a little maintenance will make it last!
 

 

We use two different credit card services providers (PayPal and VeriSign) to process our credit card transactions. Both systems handle all the security, fraud and confidentiality issues concerning credit card usage. Express Repair Center, Inc does not see your credit card information not any personal information about you. With today’s environment of credit card fraud, internet viruses identify theft and hackers breaking into computer systems, we wanted to have an outside service that guarantees the highest level of security we feel our customers deserve to have. PayPal and VeriSign provide that level of security for you and us.

 

Prices and information are updated daily on our website (Monday-Friday; holidays excluded) and are current to the best of our knowledge when posted. However, because of the dynamic nature of the computer industry, some products, prices, manufacturer promotions, product information or offers may change before we are able to update and post the information on our Web Site. In the event of an unexpected cost increase or other change, we will contact you to determine whether you want to continue your order at the new price or cancel your order. We reserve the right to decline the acceptance of any orders.

 

Express Repair Center Support, Policy and Procedures
 

Express Repair Center Electronics Service Center located in Miami, Florida, providing TV repair on all brands of Tv, Big Screen, Plasma, Monitor, Projector, Camera, Camcorder, Laptop , DLP, LCD TV and HDTV.

A Proud member of NESDA.

 

               

And the global leader in online payments

Make payments with PayPal - it's fast, free and secure!

 

 

Home

Search

Site Map

      News of Today

       Repair Services

  Big Screen TV Repair

  PLASMA TV Repair

  PLASMA TV Installation

  DLP Tv Repair

  LCD Monitor Repair

  Projector Repair

  Camera Repair

  Laptop Repair

  Time Lapse VCR

 

Products and  others Services

  Products Serviced

  Products For Sale

  Wall Mounts

  Home Theater Installation

  ISF Calibration

  Service Call Request

  Ship in Service

  Shipping Form

  Garage Sales

  Projector Rental

  Projector Lamps

 

 Our Company

  Contact us

  Our Mission

  Photo Gallery

  Testimonials

  Job Opportunities

      

 Useful Information

  Frequently Asked Questions

  Useful Links

  Link to us

  Useful Information

 

     Exchange links with us

             

Express Repair Center       Tel: 305-500-6334

7839 NW 15 STREET                   Fax: 305-500-6339

Miami, Fl, 33126

Send mail to express@ercservice.com with questions or comments about this web site.
Copyright © 2004 Express Repair Center, Inc.
Last modified: 08/14/08